OSD-350mm Hot Melt Adhesive Coating and Laminating Machine
| Specification | Details |
|---|---|
| Material width | 350 mm |
| Roller face width | 400 mm |
| Mechanical speed | 60 m/min |
| Coating weight | 5–150 g/m² |
| Glue supply accuracy | ≤5% |
| Unwind/rewind system | 3-inch air shafts, Φ400 mm |
| Tension range | 10–200 N·m |
| Drive system | Full servo with gearbox; imported servo optional |
| Control interface | 10-inch Kunlun Tongtai touchscreen |
| Power supply | 380 V, 50 Hz, three-phase |
| Machine dimensions | 2,100 × 1,150 × 1,500 mm |
| Machine weight | 1,500 kg |
1.OSD-350mm Hot Melt Adhesive Coating and Laminating Machine
The OSD-350mm is a pilot-scale hot melt coating and laminating machine for laboratories, sampling lines, and small-batch production. It processes materials up to 350 mm wide with a 400 mm roller face width. The complete line includes unwind and rewind units, tension control, multi-zone temperature control, a coating head, and a laminating nip.
The machine runs at a mechanical speed of up to 60 m/min and supports adjustable coating weights from 5 to 150 g/m², with glue supply accuracy of ≤5%. Its wider coating-weight range is useful for testing different adhesives, materials, and process settings.
Designed for Trials and Small-Batch Production
The OSD-350mm uses 3-inch air shafts for unwinding and rewinding, with a maximum roll diameter of Φ400 mm. The specified tension range is 10–200 N·m.
A full-servo drive with a gearbox provides adjustable speed and process control. Imported servo components are available as an option. The machine uses a 10-inch Kunlun Tongtai touchscreen, with an operating interface consistent with Oushida’s wider production machine.
This model is designed to help manufacturers and research teams validate coating and laminating processes on a smaller scale before moving to larger production equipment.
Industrial Components and Controls
The OSD-350mm shares its electrical and mechanical component configuration with Oushida’s wide-format machine series. Components include a Siemens PLC, Schneider low-voltage electrical components, HIWIN linear guides and ball screws, NSK bearings, and Airtac cylinders.
Using a consistent control setup across pilot and production equipment can make it easier to transfer process settings when scaling up. The machine requires 380 V, 50 Hz, three-phase power and weighs 1,500 kg. Its overall dimensions are 2,100 × 1,150 × 1,500 mm.
2.Key Features
- Processes materials up to 350 mm wide, with a 400 mm roller face
- Mechanical speed up to 60 m/min
- Adjustable coating weight of 5–150 g/m²
- Glue supply accuracy of ≤5%
- 3-inch air shafts with a maximum roll diameter of Φ400 mm
- Specified tension range of 10–200 N·m
- Full-servo drive with gearbox; imported servo available as an option
- Siemens PLC, Schneider electrical components, HIWIN guides, NSK bearings, and Airtac cylinders
- 10-inch Kunlun Tongtai touchscreen
3.Applications
The OSD-350mm is suited to adhesive material research and development, small-batch label production, hygiene product trials, and university laboratory testing. It helps users test coating and lamination processes on a smaller scale before moving to full production.
4.Choosing the Right Machine
For confirmed high-volume production, consider moving directly to the OSD-1300mm production machine. For small-batch PUR adhesive applications, consider the OSD-PUR100mm model.
Imported servo components are available to suit different budgets. The standard servo configuration is suitable for routine operation.
Application & Compatibility
Our hot‑melt equipment is widely applied across packaging, automotive manufacturing, furniture assembly, electronic component sealing, medical device production and many other sectors. Compatible with multiple adhesive types, it reliably fulfills diverse bonding application requirements.
Model selection depends on key factors including adhesive output (low‑volume dispensing or high‑volume spraying), operating temperature range, and production conditions (continuous or intermittent operation). Feel free to reach out to our technical specialists via email or phone for a tailored solution.
Yes. Oushida machines come with standard interfaces, enabling seamless integration with robotic arms, conveyor belts and other automated production systems.
Maintenance & After‑sales
Daily: Clear residual adhesive inside the glue tank.
Monthly: Carry out inspection on filters and sealing components.
Periodically: Replace wear‑prone spare parts such as gear pumps. We offer complimentary maintenance training upon your request.
Order & Delivery
Standard models: Shipment within 48 hours for in‑stock units. Customized models: 5‑15 working days, subject to specific contract agreements.
Certainly. We provide full‑range OEM & ODM services. Your custom logo and exclusive design elements can be seamlessly implemented onto our machines.
Yes, we own our manufacturing facility based in Jiangsu, China. You are warmly welcome to visit our company and production site.
